Shloka Shah

Microfabrication & Process Engineer | Semiconductor Device Integration | Embedded Firmware Engineer

About Me

I am a microfabrication engineer passionate about developing and optimizing semiconductor and thin-film processes across diverse applications — from sensors and MEMS to integrated circuits and advanced packaging.

My experience spans wafer-level fabrication (oxidation, lithography, etching, deposition, bonding) and system-level integration, giving me a complete view of how device-level performance connects to real-world implementation.

Through hands-on work in cleanroom environments and embedded data-acquisition projects, I've built a strong foundation in both process development and device integration. Bridging MEMS fabrication and embedded systems to accelerate sensor deployment in IoT environments.

My long-term goal is to contribute to the advancement of microfabrication technologies that drive the next generation of electronics and sensing systems.

Education

University of Cincinnati
Master of Science in Electrical Engineering
Sensors and Microsystems Track
August 2023 - Present | Cincinnati, OH
GPA: 3.667
Relevant Coursework:
  • Microfabrication of Semiconductor Devices
  • Microfabrication Lab
  • MEMS: Design and Fabrication
Dharmsinh Desai University
Bachelor of Technology in Electronics and Communications Engineering
July 2019 - May 2023 | Gujarat, India
GPA: 3.312

Professional Experience

🎓 University of Cincinnati — College of Engineering and Applied Sciences
Graduate Researcher | Master's Thesis
December 2023 – Present | Cincinnati, OH

Real-time Pressure Monitoring System for Post-operative Hemostasis Management

Developing a wearable, real-time pressure monitoring system to assist in hemostasis management for post-operative cardiovascular patients. The system continuously monitors localized pressure levels and transmits data wirelessly to a clinician dashboard, minimizing manual intervention and improving patient safety during the critical post-surgical period.

Research Objectives

  • Develop a wearable sensing platform for continuous, non-invasive monitoring of applied pressure
  • Implement wireless real-time data transmission for live visualization and analysis
  • Design and fabricate a custom pressure sensor optimized for sensitivity, linearity, and flexibility
  • Ensure accuracy, repeatability, and stability within clinically significant pressure ranges
  • Validate system performance under controlled and near-clinical conditions

System Architecture

  • Embedded Controller: Raspberry Pi Pico 2 W for real-time processing and wireless connectivity
  • Signal Conditioning: Buffered analog front-end ensuring stable sensor signal acquisition
  • Data Conversion: External high-resolution ADC (I²C interface) for accurate digital sampling
  • Data Visualization: Custom dashboard for real-time monitoring over secure local network
  • Power & Form Factor: Custom PCB integrating power management, communication, and sensing modules

Key Accomplishments

  • Designed and fabricated custom PCB integrating data acquisition, signal processing, and wireless communication
  • Developed embedded firmware for continuous pressure sampling, real-time filtering, and wireless data transfer
  • Implemented web-based dashboard for live visualization of sensor data
  • Currently prototyping custom flexible pressure sensor to improve mechanical compliance and measurement accuracy
  • Conducting calibration and verification under controlled bench conditions
Raspberry Pi Pico 2 W MicroPython PCB Design Sensor Development Real-time Data Acquisition
⚗️ University of Cincinnati
Research Assistant
Collaboration: Advanced Energy Consortium (AEC), University of Texas at Austin

High-Temperature Ceramic pH Sensor for Harsh Environments

Contributing to the development of a robust pH sensor capable of accurate and stable measurements in high-temperature, high-pressure environments such as deep boreholes and geothermal wells. The sensor leverages yttria-stabilized zirconia (YSZ) ceramic technology for structural resilience and ionic conductivity, enabling reliable electrochemical operation without frequent calibration.

Key Contributions

  • Developed YSZ-based Hg/HgO–Ag/AgCl electrochemical cell design for precise pH sensing at 125–150°C
  • Characterized nanocrystalline YSZ membranes of varying thickness to optimize ion conduction and voltage stability
  • Designed custom analog front-end PCB with high-impedance buffering, signal conditioning, and Bluetooth readout
  • Evaluated temperature-dependent Nernst slope behavior, sensor linearity, and drift (sub-mV/hour stability achieved)
  • Assisted in PCB integration, mechanical packaging, and sensor testing for borehole deployment
YSZ Ceramic Materials Electrochemical Sensing Analog PCB Design Sensor Characterization Bluetooth Integration
🦺 University of Cincinnati
Graduate Research Assistant
Funded by: Ohio Bureau of Workers' Compensation (BWC)

Smart Helmet for Construction Worker Safety

Interdisciplinary research initiative developing a Smart Helmet system to enhance safety for construction workers exposed to head-impact risks. The system integrates embedded sensors, BLE connectivity, and real-time alert mechanisms to detect, timestamp, and respond to impact events in environments without Wi-Fi connectivity.

Technical Contributions

  • Designed embedded firmware on SiLabs EFR32 integrating gyroscope, accelerometer, and impact sensor for motion and collision detection
  • Developed time synchronization algorithm converting onboard counter to real-time values without Wi-Fi
  • Implemented low-power operation with deep sleep mode until impact occurs, then logging precise event data
  • Configured BLE-based communication to transmit impact data to smartphone application for monitoring and alerts
  • Enabled LED and buzzer notifications to alert nearby personnel during impact incidents
  • Collaborated with interdisciplinary teams for seamless hardware-software integration
SiLabs EFR32 Embedded C BLE Communication Low-Power Design Time Synchronization IoT Safety Systems
University of Cincinnati, Physics Department
Teaching Assistant
September 2024 – April 2025 | Cincinnati, OH
  • Led weekly laboratory sessions for 70+ undergraduate students, demonstrating experimental diagnostics and ensuring safety compliance
  • Emphasized design-to-test feedback and iterative improvement during lab sessions
  • Graded technical reports and exams, offering constructive feedback to improve scientific communication
  • Assisted in curriculum development by integrating theoretical concepts with hands-on experimentation
  • Demonstrated teamwork and communication skills in a dynamic, open environment
🛰️ Indian Space Research Organisation (ISRO)
Research Intern | EPSA–GHCAG–LHD Division
December 2022 – March 2023 | Space Applications Centre, Ahmedabad

Study of Rivers as Complex Networks

Guide: Mr. Vibhuti Bhushan Jha (Scientist/Engineer–SD, ISRO) | Institution: Dharmsinh Desai University

Explored the topological and spectral characteristics of river networks using complex network theory at ISRO's Space Applications Centre. Analyzed river basins as interconnected systems to identify structural patterns relevant to hydrology, geomorphology, and environmental modeling.

Research Objectives

  • Model river drainage systems as complex networks using graph theory
  • Extract and process geospatial data (Digital Elevation Models and shapefiles) to represent real river basins
  • Analyze connectivity, scaling laws, and spectral features of river systems to understand universal properties
  • Compare real-world river networks with theoretical models such as Optimal Channel Networks (OCN)

Methodology & Key Findings

  • Extracted river basins and networks from HydroSHEDS DEM data using QGIS and Python-based tools
  • Converted river shapefiles into graph representations (nodes and edges) and computed adjacency matrices
  • Analyzed eigenvalue spectra, betweenness centrality, closeness centrality, degree distributions, and spectral gap
  • Validated that river networks exhibited finite-width eigenvalue distributions with measurable spectral gaps, independent of basin size and shape
  • Confirmed consistency with Optimal Channel Network (OCN) models, demonstrating universality in river network topology
  • Demonstrated application of spectral graph theory to hydrological and ecological systems for connectivity and stability inference

Impact

The study validated the applicability of complex network theory to real-world river systems and suggested a potential framework for large-scale hydrological modeling and environmental data interpretation. Future extensions include cross-planetary analysis of drainage networks (e.g., Mars, Moon) using spectral topology methods.

Python (NetworkX, NumPy, Matplotlib) QGIS Complex Network Theory Spectral Graph Theory GIS & Spatial Analysis Hydrological Modeling

Academic & Research Projects

🔬 Fabrication of a Piezoresistive MEMS Pressure Sensor

University of Cincinnati — EECE 5141/6041C: Microfabrication Lab

Instructor: Dr. Tao Li | Team: Shloka Shah, Robert Hovarth, Rajkumar Henry

Designed, fabricated, and characterized a MEMS-based piezoresistive pressure sensor using standard CMOS-compatible processes, integrating both front-end (FEOL) and back-end (BEOL) fabrication steps.

Cleanroom Processes Executed

  • Wafer Preparation: Baker clean (HF dip, JTB-100 clean), native oxide removal, and dry–wet–dry oxidation at 1000°C to form SiO₂ field layer (~1.15 µm)
  • Photolithography: Three-mask process using AZ1518 photoresist for membrane patterning, resistor alignment (with backside IR alignment), and via openings
  • Etching: Buffered Oxide Etch (BOE) for window definition; 25% TMAH anisotropic Si etching at 75°C to form diaphragms (target: 90 µm thickness)
  • Doping & Annealing: Boron ion implantation at 50 keV, 8×10¹⁴ atoms/cm² with 7° tilt; annealed at 900°C in N₂ for 30 min followed by oxidation (10–40–10 min)
  • Metallization: E-beam evaporation of 0.5 µm Al film at 10 Å/s deposition rate, followed by sintering at 500°C in N₂ for 5 min to achieve good ohmic contact
  • Anodic Bonding: Si-glass bonding (Pyrex) at 450°C, 500 V, 1.5 h to encapsulate diaphragm structure

Metrology & Characterization

  • Ellipsometry for oxide thickness uniformity
  • 4-Point Probe for sheet resistance (Al: 0.126 Ω/□, PZR: 214.9 Ω/□)
  • Optical microscopy and SEM for mask alignment verification and surface inspection
  • Pressure chamber testing from 0–30 psi for sensor calibration

Results & Technical Competencies

  • Achieved sensitivity of 4.86 mV/psi and linearity of 2.007% FS
  • Stable device response across multiple pressure cycles with minimal hysteresis
  • Process yield improved through iterative mask alignment and SPC-based oxide control
  • Full-cycle MEMS process flow integration (oxidation → lithography → etching → doping → deposition → bonding → testing)
  • Application of Deal–Grove oxidation model, piezoresistive strain theory, and Wheatstone bridge calibration
MEMS Fabrication Photolithography Ion Implantation E-Beam Evaporation Anodic Bonding SPC Ellipsometry 4-Point Probe

🅿️ Smart Car Parking System

Verilog & Quartus FPGA Simulation

Developed a secure, automated parking management system using Finite State Machines (FSM) implemented in Verilog and simulated in Intel Quartus II. The project aimed to reduce human involvement and optimize parking slot utilization through logic-based automation.

Key Contributions

  • Designed a Moore-type FSM to control gate access, LED indicators, and state transitions across five conditions (IDLE, WAIT PASSWORD, RIGHT PASSWORD, WRONG PASSWORD, STOP)
  • Implemented password-based authentication for vehicle entry and exit to enhance parking security
  • Integrated entrance and exit sensors to track vehicle flow and dynamically update slot availability
  • Verified logic through waveform simulation in Quartus, achieving low power consumption and efficient resource utilization
  • Proposed extensions for multi-slot parking with LCD-based vacancy display and unique access keys for enhanced safety

Impact

Demonstrated a scalable, cost-effective parking solution emphasizing real-time monitoring, automation, and minimal hardware usage — paving the way for future IoT-integrated smart infrastructure.

Verilog Intel Quartus II Finite State Machines (FSM) FPGA Simulation Digital Logic Design

💧 Water Quality Monitoring System

IoT-Based Project

Developed an IoT-enabled system for real-time monitoring of water quality parameters such as pH and turbidity, using ESP32 as the core microcontroller. The project aims to ensure safe and hygienic water supply by providing continuous sensor-based quality assessment and remote visualization through a web interface.

Key Contributions

  • Interfaced pH and turbidity sensors with the ESP-WROOM-32 microcontroller to measure chemical and physical properties of water
  • Designed and programmed a real-time web dashboard using Server-Sent Events (SSE) protocol to display live sensor readings over Wi-Fi
  • Implemented ADC-based signal processing to convert analog sensor outputs into calibrated digital readings
  • Simulated circuit operation in Proteus before hardware deployment to validate sensor accuracy and communication flow
  • Proposed extensions for automated alerts via GSM and multi-sensor expansion for larger-scale environmental monitoring

Impact

Delivered an efficient and low-cost solution for real-time environmental monitoring, capable of supporting future IoT scalability for smart cities and industrial water management.

ESP-WROOM-32 (ESP32) pH & Turbidity Sensors Wi-Fi (SSE) HTML/CSS Web Dashboard C (Arduino IDE) Proteus

💡 Smart Street Lighting System

Embedded Hardware Project

Designed and implemented a sensor-based Smart Street Lighting System that automatically controls streetlights based on ambient light and movement detection. The system focuses on energy efficiency and automation, turning lights ON only during low-light conditions and when motion is detected, thereby reducing power wastage.

Key Contributions

  • Built a comparator-based light detection circuit using LDR and LM741 Op-Amp to differentiate day and night conditions
  • Integrated IR motion sensors to detect approaching vehicles or pedestrians, triggering selective lighting for active road sections
  • Designed a monostable 555 timer circuit to provide controlled delay for LED activation, ensuring lights remain ON until motion has passed
  • Used relays and BC547 transistor drivers for reliable switching of lights and sensors based on real-time input
  • Developed a modular circuit easily adaptable for IoT integration and scalable to larger road networks

Impact

Achieved significant power savings through automation and demonstrated how embedded hardware solutions can improve urban infrastructure efficiency. Proposed extensions include vehicle-speed estimation, number plate recognition, and IoT-based centralized control for smart city integration.

Analog Electronics LDR & IR Sensors LM741 Op-Amp 555 Timer Relay Control BC547 Transistor

Related Academic Training

Microfabrication of Semiconductor Devices – Fundamentals of lithography, oxidation, diffusion, metallization, and etching processes.
Microfabrication Lab – Hands-on fabrication and testing of MEMS sensors (above project).
MEMS: Design and Fabrication – Micromachining principles, diaphragm design, and thin-film material properties.

Certifications Supporting Fabrication Expertise

Semiconductor & MEMS Specializations (Udemy):
• FinFET Process Integration — Udemy (Issued Sep 2025)
• Failure Analysis for Semiconductor Devices — Udemy (Issued Jul 2025)
• Mastering Photolithography: Heart of Semiconductor Process — Udemy (Issued Jul 2025)

Industry & Academic Programs:
• OASiS Foundations Program – Intel-supported cleanroom training in semiconductor process flow and yield optimization
• Semiconductor Fabrication 101 – Purdue University (In Progress)
• Semiconductor Design 101 – Purdue University (In Progress)
• Advanced Semiconductor Packaging – Arizona State University (2025)
• Six Sigma White & Green Belt – LinkedIn Learning (2025, In Progress)

Technical Skills

Photolithography & Patterning

  • Mask Aligner (UV exposure with backside alignment)
  • Spin Coater (AZ1518 photoresist, HMDS coating)
  • Hot Plate / Soft Bake & Hard Bake Stations
  • Optical Microscope (pattern inspection)

Oxidation & Diffusion

  • Thermal Oxidation Furnace (dry/wet/dry cycles)
  • Annealing Furnace (dopant activation)

Etching & Surface Preparation

  • BOE Etch Setup (silicon dioxide removal)
  • TMAH Etch Bath with Temperature Control
  • Anisotropic Silicon Etching

Deposition & Metallization

  • E-Beam Evaporator (Al metallization)
  • Sintering / Anneal Furnace (ohmic contacts)
  • Thin-Film Deposition

Bonding & Packaging

  • Anodic Bonder (Si–Pyrex bonding)
  • Wire Bonder (Al interconnects)

Metrology & Characterization

  • Ellipsometer (SiO₂ thickness measurement)
  • Four-Point Probe (sheet resistance)
  • Precision Micrometer / Thickness Gauge
  • SEM (Scanning Electron Microscopy)
  • Optical Microscopy (high magnification)
  • Statistical Process Control (SPC)
  • Design of Experiments (DOE)

Device Testing

  • Pressure Chamber (sensor calibration)
  • I-V Characterization

Data Analysis & Programming

  • Python (NumPy, Pandas, Matplotlib)
  • MATLAB
  • R
  • Excel (Advanced)

Embedded Systems & Microcontrollers

  • ARM Cortex-M
  • Silicon Labs EFR32
  • Raspberry Pi Pico W
  • ESP32, Arduino
  • MicroPython, Embedded C

Software Tools

  • Keil, Quartus
  • Eagle, Proteus, Multisim
  • COMSOL Multiphysics
  • AutoCAD, SolidWorks
  • QGIS

Certifications & Training

Semiconductor Fabrication 101
Purdue University | In Progress
Semiconductor Design 101
Purdue University | In Progress
Data Analytics with Excel and R
IBM | In Progress
Six Sigma Green Belt
LinkedIn Learning | In Progress
Advanced Semiconductor Packaging
Arizona State University | 2025
Six Sigma White Belt
LinkedIn Learning | 2025
OASiS Foundations Program
Ohio-Southwest Alliance on Semiconductors | 2025
Complete Python Developer: Zero to Mastery
Udemy | 2023
Embedded C Programming for Microcontrollers
Pantech Solutions | 2023
Embedded System Designing and IoT
Pantech Solutions | 2022
↑